
PIC16(L)F1782/3
DS41579C-page 368
Preliminary
2011-2012 Microchip Technology Inc.
30.2
DC Characteristics: PIC16(L)F1782/3-I/E (Industrial, Extended)
PIC16LF1782/3
Standard Operating Conditions (unless otherwise stated)
Operating temperature
-40°C
TA +85°C for industrial
-40°C
TA +125°C for extended
PIC16F1782/3
Standard Operating Conditions (unless otherwise stated)
Operating temperature
-40°C
TA +85°C for industrial
-40°C
TA +125°C for extended
Param
No.
Device
Characteristics
Min.
Typ
Max.
Units
Conditions
VDD
Note
Supply Current (IDD)(1, 2)
D009
LDO Regulator
—75
—
A
—
High Power mode, normal operation
—15
—
A—
Sleep VREGCON<1> = 0
—0.3
—
A—
Sleep VREGCON<1> = 1
D010
—
8
16
A1.8
FOSC = 32 kHz
LP Oscillator mode (Note 4),
-40°C
TA +85°C
—12
20
A3.0
D010
—
18
63
A
2.3
FOSC = 32 kHz
LP Oscillator mode (Note 4, 5),
-40°C
TA +85°C
—
20
74
A
3.0
—
22
75
A
5.0
D012
—
160
650
A1.8
FOSC = 4 MHz
XT Oscillator mode
—
320
1000
A3.0
D012
—
260
700
A
2.3
FOSC = 4 MHz
XT Oscillator mode (Note 5)
—
330
1100
A
3.0
—
380
1200
A
5.0
Note 1:
The test conditions for all IDD measurements in active operation mode are: OSC1 = external square wave, from
rail-to-rail; all I/O pins tri-stated, pulled to VDD; MCLR = VDD; WDT disabled.
2:
The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O pin loading
and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact on the current
consumption.
3:
For RC oscillator configurations, current through REXT is not included. The current through the resistor can be extended
by the formula IR = VDD/2REXT (mA) with REXT in k
4:
FVR and BOR are disabled.
5:
0.1
F capacitor on VCAP.
6:
8 MHz crystal oscillator with 4x PLL enabled.